In case you missed last weeks blog I had a project that was put on hold thanks to one stubborn screw that was giving me trouble. Thanks to some vice grips and wd40 that was sorted out and what follows is the project in its entirety.
We got this tiny rocking chair from my grandmother after it sat in her basement for goodness knows how long.
The upholstery was terrifying, there were dead spiders, but at least they were dead.
The wood base was still in excellent shape so there was no need to cut a new one. I used foam from an old mattress pad doubled over along with remnant fabric I had laying around to reupholster it.
I used the same method I did on our dining chairs which you can see here.
The chair itself was in pretty rough shape too, pegs were loose and screws were rusted. Hence the trouble we had getting the one screw out. The head rusted off leaving only the threaded portion.
We ended up drilling out around it, spraying wd40 in the hole and pulling it out with vice grips
I later filled the hole with wood filler so the new screw would have something to grip
After disassembling the chair it probably looked like a pile of fire wood to anyone else but the wood was still in excellent shape after a good sanding.
However even after sanding the pieces didn’t match. Some were a very light wood, some had a red hue to them. If I were staining it a dark color it wouldn’t have mattered but I wanted to keep the piece light so I opted to do a wash of paint.
I decided to try out target’s paint brand. I believe it’s made by valspar which is generally not my favorite but it worked well for the wash due to being a rather flat base.
Some new screws and wood glue to secure loose pegs and the chair is back to being a wonderful sturdy piece again. It’s an excellent edition to our library tucked over by the children’s books.