Do you remember that post I did for a secret Santa, where I made an earring display hangar. I’ll link here it if you don’t.
You should check that blog out first because this is me refining that process. Mr. Smith’s Aunt makes jewelry and owns a shop where all the goods are hand made. You can find out more about it on their Facebook page here.
I thought it would be fun to get involved by making some fun ear ring cards. I’ve got a few different styles I’m working on, but the most involved ones are a variation on the one I did for my secret Santa.
I started off by doing a color wash on the laser cut frames in green and purple; they are the primary colors of the store.
I then cut out appropriately sized sections of lace for each frame.
Then my favorite part…experimentation. I used some diluted paint to dye the lace.
I soaked the lace in a paint and water mixture and then just gave it time to “cook”. By that I mean I zapped it for about 1 minute in the microwave and then just let it sit.
After 10 minutes or so I pulled the lace out of the paint mixture, doused it with lots of salt, and gave it a good toss. Yup just plain old salt. It acts as a fix for most dyeing projects.
After a very good rinse in cold water I lay the pieces out to dry.
In my original hangar I used a second, identical frame to sandwich the lace between. This time around,to cut costs, and because the double frame was a bit hard to situate, I chose to use long slender craft sticks.
I simply cut them in half and sanded the raw edge round to match its opposite.
After a coat of paint on the sticks I used wood glue to sandwich the lace between the frame and the craft sticks, and clamped them with clothes pins
After a good drying period and an exact-o knife to clean up any overhanging lace on the back, the finished product is ready for the shop.
One thought on “Mass Production”